ACI 318 (1989). Building Code Requirements for Reinforced Concrete, American Concrete Institute, Detroit, Michigan.
ACI 318 (1995). Building Code Requirements for Reinforced Concrete, American Concrete Institute, Detroit, Michigan.
AISI LRFD (1991). Cold Formed Steel Design Manual, American Iron and Steel Institute.
AISC LRFD (1993). Load and Resistance Factor Design Specification for Structural Steel Buildings, AISC, Chicago.
Architectural Institute of Japan (1987). Recommendations for the Design and Fabrication of Tubular Structures in Steel, Architectural Institute of Japan, Tokyo, Japan.
Architectural Institute of Japan (1990). Recommendations for the Design and Fabrication of Tubular Structures in Steel, Architectural Institute of Japan, Tokyo, Japan.
AS 3600 (1988). Concrete Structures, Standards Australia, Sydney.
AS 4100 (1990). Steel Structures, Standards Australia, Sydney.
BS 5400 (1979). “Steel, concrete and composite bridges,” Code of Practice for Design of Composite Bridges, British Standards Institution, 1979.
BS 5950 (1985). “Structural Use of Steel in Building,” Code of Practice for Design in Simple and Continuous Construction: Hot Rolled Sections, British Standards Institution, 1985.
CIDECT (1995). “Design Guide for Concrete Filled Hollow Section Columns Under Static and Seismic Loading,” Bergmann, R., Matsui, C., Meinsama, C. and Dutta, D. (eds), TUV-Verlag, Germany.
Eurocode 4 (1992). “Design of Composite Steel and Concrete Structures,” European Committee for Standardisation, Brussels.
Eurocode 4 (1994). “Design of Composite Steel and Concrete Structures,” Commission of the European Communities, British Steel Institute, London.
Other Works Referenced
Attard, M. M., and Setunge, S., (1996). “Stress-Strain Relationship of Confined and Unconfined Concrete,” American Concrete Institute Materials Journal, Vol. 93, No. 5, September-October, pp. 432-442.
Bondale, D. S. and Clark, P. J. (1966). “Composite Construction in the Almonsbury Interchange,” Conference on Structural Steelwork, British Construction Steelwork Association, London, September 1966.
FEMA-267A (1997). “Interim Guidelines: Evaluation, Repair, Modification, and Design of Welded Steel Moment Frame Structures,” SAC Joint Venture, Report No. SAC-96-03.
Grimault, J. P. and Janns, J. (1977). “Reduction of the Bearing Capacity of Concrete-Filled Hollow Sections due to Local Buckling,” Preliminary Report, ECCS Colloquium on Stability of Steel Structures, Liege, 175-179.
Kato, B. et al. (1977). “Restoring Force Characteristics of Steel Frames Equipped with Diagonal Braces,” Journal of Structural Construction Engineering, Vol. 260, Architectural Institute of Japan, October.
Mandler, J. B., Priestly, M. J. N. and Park, R. (1988). “Theoretical Stress-Strain Model for Confined Concrete Columns,” Journal of Structural Engineering, Proceedings of the American Society of Civil Engineers, Vol. 114, No. 8, August, pp. 1804-1848.
Martinez, S., Nilson, A. H. and Slate, F.O. (1984). “Spirally Reinforced High-Strength Concrete Columns,” American Concrete Institute Structural Journal, Vol. 81, No. 5, September-October 1984, pp. 431-442.
Neogi, P. K., Sen, H. K., and Chapman, J. C. (1969). “Concrete-Filled Tubular Steel Columns under Eccentric Loading,” The Structural Engineer, Vol. 47, No. 5, May 1969, pp. 187-195.
Rotter, J.M. (1982). “Composite Columns – Lectures 3 and 7,” Postgraduate Course Notes, School of Civil and Mining Engineering, University of Sydney.
Sherman, D. R. (1992). “Tubular Members,” Constructional Steel Design: An International Guide, Dowling, P. J., Harding, J. E., and Bjorhovde, R. (eds.), Elsevier Science Publishers Ltd., New York.
Wakabayashi, M. (1976). “A Proposal for Design of Composite Columns and Beam-Columns,” Preliminary Report of Second International Colloquium on Stability, September.
Wheeler, A. T. and Bridge, R. Q. (1993). “Analysis of Cross-Sections in Composite Materials,” Proceedings of the Thirteenth Australasian Conference on the Mechanics of Structures and Materials, Schmidt, L. C. (ed.), July 5-7, 1993.